Eotech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUM User Manual download pdf (Page 41)

2-19

2.9 MODE ACTIVATION

NOTE

The ATPIAL is equipped with a shut-down feature

that will automatically turn off any laser that has

been activated for five continuous minutes. To

reactivate, press (single tap) the FIRE Button.

Once the mode of operation has been selected, the ATPIAL

may be used in that mode by activating the system as

follows:

Momentary Operation

Pressing and holding the FIRE Button operates the ATPIAL

in the selected mode. The selected laser(s) will remain on

until the FIRE Button is released, or after five minutes of

continuous operation, whichever comes first.

Continuous Operation

Pressing the FIRE Button twice in rapid succession (double-

tap) operates the ATPIAL in the selected mode. The

selected laser(s) will remain on until the FIRE Button is

pressed a third time (single tap), or after five minutes of

continuous operation, whichever comes first.

Remote Cable Switch

When installed, the Remote Cable Switch may be used to

provide the same functionality as the FIRE Button and is

operated in the same manner. The Remote Cable Switch

plugs into the remote jack as shown in Figure 2-12. It is then

secured to the weapon to best suit the operator’s firing

preference using the retaining straps and / or hook and loop

fastener tape.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 69 70

No comments

Eotech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUM User Manual Page 41