Eotech XPS2 User Manual download pdf (Page 21)

2.1.4 Electronic Features

All electronic controls are via pushbutton switches located at the rear of the unit housing as

shown in Fig. 4. To ensure proper operation of the pushbutton switches, press firmly on the

center of the switch.

1. ON/ Auto Battery Check

Pressing the Up or Down Arrow pushbutton switches will turn the sight ON at Level 12. See

item 4 under this section for a description of Auto shutdown. The sight will automatically perform

a battery check every time it is turned on. The reticle will blink when the batteries have between

2.5 and 5 hours of useful life left.

2. OFF

To turn the sight off, simultaneously press both the UP and DOWN arrows. Verify that the sight

is on/off by looking through the heads-up display window for the reticle.

3. Brightness Adjustment

Pushbutton switches vary the brightness intensity of the holographic reticle pattern. Pressing

and releasing the pushbutton switches moves the brightness level UP or DOWN one (1) step

from the previous setting. Pressing and holding the UP arrow or DOWN arrow switch will

change the brightness level up or down continuously in steps. Twenty (20) brightness settings

provide a dynamic range of 146,000:1 from the lowest setting to the highest setting.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

No comments

Eotech XPS2 User Manual Page 21